ZeroWater 30-Cup Dispenser in Blue

Unlike any other leading water dispenser, the ZeroWater 30-Cup Dispenser utilises a patented 5-stage Ion Exchange Filtration system that effectively removes all dissolved solids from your water. Using ZeroWater’s Ready-Pour™ technology this dispenser allows you to pour already filtered water whilst water which hasn’t yet filtered remains sealed safely in the reservoir. Equipped with a one-hand push-and-pour spout, this dispenser allows you to fill your cup or favourite water bottle without any lifting. This dispenser is perfect for your home or small office use. 

Key Features

• 30-Cup / 7.1L total capacity
• Patented 5-stage Ion-Exchange Filtration system
• Included free Laboratory-grade water quality metre
• Removes 99.6% of TDS (Total Dissolved Solids)
• Certified* to reduce Lead and PFAO/PFOS (“forever chemicals”)

5-Stage Ion Exchange Filtration

ZeroWater uses a patented 5-Stage Ion Exchange Filtration system in all of their products, removing 99% of Fluoride and other inorganics, such as nitrates. Your water will pass through a coarse filter screen to remove any suspended solids such as rust and dirt that make your water appear cloudy, and then a foam distributor will remove any additional suspended solids. Next, a multi-layer activated carbon and oxidation reduction alloy will remove organic contaminants such as Mercury, Chlorine, Chloramine, pesticides and herbicides while stopping bacteria from growing. The Dual Comprehensive Ion Exchange Resin will then remove inorganic compounds such as metals, non-metals and even radiological contaminants. Finally, an ultra-fine screen and non-woven membrane layers will remove any remaining solids. IAPMO certification proves the filter reduces PFOA/PFOS (“forever chemicals”), Lead, Chromium and Mercury, rest assured your water is of the highest quality.

Included laboratory-grade water quality metre 

It is not uncommon for UK tap water to contain TDS (Total Dissolved Solids) between 100-500 PPM. When using ZeroWater’s 5-Stage Ion Exchange Filtration you can rest assured your water quality is pristine with the included laboratory-grade water quality metre. After your water is filtered the included metre will deliver a reading of “000” PPM (Parts Per Million) leaving you confident in the quality of your drinking water. Please note that it is normal for this reading to increase as the filtration system ages while still filtering your water to an immaculate degree. (Once the TDS meter reads “006” or above, replace your filter to ensure you maintain high-quality water filtration).

Simple installation and effortless use

Replacing your water filter should be simple, ZeroWater filters have been designed especially for easy replacement. Twist the filter into the bottom of the reservoir until there is a complete seal between the filter, o-ring and reservoir, fill the reservoir with cold tap water and place the lid on top, allowing the water to pass through before re-filling, it really is that simple. Depending on your water temperature preference store in or outside your refrigerator to enjoy the safest, purest-tasting water.

*Certified to NSF/ANSI standards 42 and 53. Issued 5/7/2021

Extra Information

ZeroWater Filter Performance Sheet